Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kimberly
January 19, 2018
Dishwasher will not drain completely at end of cycle. It will drain if you start another cycle. I replaced the pump and checked the drain hoses. Does it need a control panel?
For model number WDF510PAYW2
Hello Kimberly,
Thanks for your question. It could be worth checking and replacing the filter basket as well, part number PS11759673. You may also want to test the turbidity sensor, part number PS11757214, by checking it with a multimeter to test for continuity. Replace it if it shows no continuity.
I hope this helps.
Does the control board kit w10804121 come with the wires as well? Ours shorted out and the wires were damaged.
Hello Justin, thank you for contacting us, This is just the control board. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
January 28, 2018
My indicator lights are not all working .Can i replace bulbs or do i need a new control board?
For model number WDF510PAYS6
Hello Bill, thank you for your question. This unit doesn't have replacement LED bulbs, you would have to replace the control board itself. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Samantha
February 5, 2018
My dishwasher bad not been trying the dishes at all. I have replaced the heating element and thermostat. My heating element still does not get hot, the water is only tap water warm and my dishes are still wet after the cycle is complete. Is my next step to replace the control board? Thank you.
For model number WDF510PAYB2
Hi Samantha,
Thank you for your question. If you are also using rinse aid when you do your dishes then it may be your control board that is the issue. Other than there being something wrong with the wiring, that is the only other part that I could think of that would cause that issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
October 4, 2022
my Whirlpool model WDF510PAYS6 dishwasher is not running the wash cycle. The control panel works, and the pump runs at the start of the cycle, but no water enters and the pump doesn't run during the wash cycle. The soap dish opens, the heating element works during the drying cycle, and the cycle complete lights go on after several hours.
Does this mean I need a new circuit board (your part no. PS11722936) or is there something else I should look at?
For model number WDF510PAYS6
Hello Joe, thank you for your question. Most of the time a clogged or damaged filter, part number PS11759673, can be the potential cause of the described symptom. If this does not help, it is the water supply issue and the water inlet valve, part number PS12578165, is most likely faulty. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
The dishwasher doesn't have hot water. If i replace the control board, will that solve the problem. I have already replaced the thermostat and the heater.Thank you
For model number WDF510PAYS6
Hi Cheryl,
Thank you for your inquiry. Before starting a load in the dishwasher, turn the hot water tap on and make sure it is hot before starting load. If this does not help you may have to check the element to see if it is working properly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Steve
November 22, 2019
My dishwasher will not power on lights dont come on has power to the unit i tried a new controller and still nothing
For model number WDF510PAYS2
Hello Steve,
Thank you for your question. Our sources suggest replacing the heating element to fix the issue under part PS8260087 for your model. Hope this helps!
