Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John H - June 18, 2022
Verified Purchase
Great experience
Quick shipping, part was exactly what I needed. I removed old control board and installed new control board in under 30 mins. Dishwasher works like new, cheap and easy repair.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dishes were not drying, started coming out dirty
replaced heating element, it was cracked...still no heat. Replaced high limit thermostat...still no heat. Replaced electronic control circuit board, dishwasher now performs like new.
Other Parts Used:
ronald from OXFORD, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Garrett
January 15, 2019
The heating element in my washer isn’t working. There seems to be no voltage coming from the control board to the element. Is there anything else I should check before ordering the control board?
For model number 66515113K216
Hello Garrett, Thank you for the question. I suggest testing the High Limit Thermostat, PartSelect Number PS11743423. This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element. You can test it with a multimeter to see if it has continuity. I would also double check the wiring going to the heating element for any visible damage. Hope this helps!
Our dishwasher does not complete it's wash cycle. It will run about half way and then stop with the button flashing. If I hit the wash button again it will finish washing the dishes. Do I need to replace the control circuit board? It works fine when I use the one hour cycle.
For model number 665-15119k215
Hi Robert, as best as we can guess it does seem like a control board issue. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
