Maytag/Maytag_Thumb/JO3DJX3W.gif
See part 20 in the diagram
Replacing your Whirlpool Dryer Drive Belt play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Drive Belt

★★★★★
★★★★★
25 Reviews
$36.35   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11722115
Manufacturer Part Number 661570V
Manufactured by Whirlpool
Product Description

Drive Belt Specifications

The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium" difficulty to install. Refer to your model number and user manual to ensure this part is correct for you. To complete this repair you will need a Phillips screwdriver, 1/4 inch nut driver, a putty knife, and a pair of needle nose pliers. Ensure you disconnect your power to the dryer before beginning this repair, which should take between 30 and 60 minutes maximum to complete.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Will not tumble | Will Not Start | No heat or not enough heat
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# 661570V replaces these:
AP5983729, 3387610, 3389728, 3393999, 661570, 661570VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

17 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hector
November 11, 2017
Will this belt fit my Whirlpool duet dryer
For model number Wed9150ww0
Hi Hector, Thank you for the question.Checking the model number I can confirm this belt is the correct part for your appliance.The belt is 93 1/2 inches long, 4 ribs 3 grooves. Please see the link below to our video on how to install the belt.Good luck with the repair! https://www.youtube.com/watch?v=whFYs7Tg9Uw

13 people found this helpful.

Was this helpful?
Thank you for voting!
Ken
March 7, 2018
The video included in the part for the belt replacement does not show my dryer.
For model number WGD9200SQ0
Hello Ken, thank you for your question. The video might have been shot with a different appliance, but the overall installation should be the same. This belt is used on multiple models and, visually speaking, might look different. Per your model, this part number Drive Belt 661570V is the exact replacement part. I hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Gavin
April 11, 2018
Im replacing the belt on this Kenmore 90 series and i can see on the old belt the part # is stamped.....3387610 and maybe (435et) after that. apparently the new part number is ps11722115 and replaces that old belt/part #. i do notice in the description it says there are 3 grooves and 4 ribs, but i am counting 4 grooves and 5 total ribs on this old belt. i assume im counting correctly.....a rib on each edge and then 3 ribs inbetween, totalling 5. ...which of course makes 4 grooves total. am i missing something or as long as the new one has as many or less than the old one, it will seat just fine on the grooves/ribs of the motor shaft like its meant to, correct? maybe i just should go with what is matched up with what i entered and what was given as the new part # and replacement., although im without the dryer and want to try and get the correct parts the first time. also, for the same dryer model, the lint screen foam seal that is attached to the inside of the screen housing is ripped. the one on the blower motor cover is fine but the seal that should keep lint from getting out of the screen housing and into the cabinet and be blown directly out to vent pipe is the one i need. can i not just use the same exact foam strips that are used as weather stripping on a door as long as it compresses and is tight seal? unless its a special heat resistant foam or something, that alternative is ok, right? thanks , sorry so long.
For model number 96590120
Hello Gavin, thank you for your question. Yes, the correct belt that the manufacturer recommends for your specific appliance model is part number Drive Belt 661570V. I don't believe they count the first rib when giving description of the belt. Either way, per you model information this is the right belt and will work with your unit. The lint screen foam seal is part number Seal, Outlet Housing part number WP697813. This is a specific piece of foam material that is made specifically for dryers, and should be used for this repair. It is made of a heat resistant material. I hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Dianne
March 28, 2018
Do you have a video on how to install the drive belt?
For model number WED5600XW0
Hi Dianne, Thank you for your question. Yes, it is listed just above the Q&A on the part information page. Here is the link: https://youtu.be/whFYs7Tg9Uw . I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Leon
March 12, 2018
I have a electric dryer an i want to put the belt back on, if you have one video to play so i can see the instructions.
For model number medc400vw0
Hi Leon, Thank you for your question. There is a video listed on the webpage with the belt that you have referenced in your question to us that you may reference on how to install it. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jeremy
February 6, 2018
Our dryer turns on, heats up, and the motor hums. I ordered a new motor, idler pulley, and belt. After installing the new items, nothing happens when i push start. No motor humming or heat. What direction should i begin looking at?
For model number MED9700SB0
Hi Jeremy, Thank you for your question. If the dryer is not starting, you will need to check the internal bias thermostat, the electronic control board, the door switch, the high limit thermostat and the fuse. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
CECILIA
October 31, 2017
Do you have a video or instruction on how to change the drive belt on the dryer ?
For model number LTE6234DQ2
Hi Cecilia, Thank you for the question. Please see the link below for the video. Good luck with the repair! https://www.youtube.com/watch?v=whFYs7Tg9Uw

2 people found this helpful.

Was this helpful?
Thank you for voting!
Judi
November 4, 2017
My dryer stopped running,we opened the top and front and found the belt was broken. If we just replace the belt can we be sure the dryer will run or do we have to check something else? Judi
For model number GEQ9800LW1
Hi Judi, Thank you for the question. I suggest checking the pulley on the motor and the Idler pulley. As long as there was no damage tot he pulleys when the belt broke you should be fine replacing just the belt.Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Anne
November 8, 2017
How do you replace a belt in a stack dryer, what is the felt like belt around the drum, mine appears to be shredding. Primary symptom, loud thumbing noise while drying but still works.
For model number WET3300SQ2
Hi Anne, Thank you for the question. The belt for your model number is PartSelect Number: PS11722115. The felt seal at the front and back of the drum is Part Number: PS970088 and this prevents the drum from rubbing. Here is a link to the video we have for installing the belt. Hope this helps! https://www.youtube.com/watch?v=whFYs7Tg9Uw

1 person found this helpful.

Was this helpful?
Thank you for voting!
Irwin
September 2, 2019
Will this belt work for the Bosch clothes dryer #wtb86200uc/01.
For model number WTB86200UC/01
Hello Irwin, thank you for inquiring. It is not shown as compatible to your model. The replacement for your model is Drive Belt part number PS8726307. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Whirlpool Dryer Drive Belt

Replacing your Whirlpool Dryer Drive Belt play video
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 18 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Need it a new pulley and belt
I did the repair all by my self and just payed for the parts.
  • Lucas from Nuevo, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    WP40045001, 661570V
121 of 169 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken belt
First I removed back and top of dryer, then the support braces holding the drum, after that I took the drum out and the blower covers and cleaned the whole dryer of lint and other debris. Installed the new belt and then reassembled the dryer.
  • Larry from exeter, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    661570V
55 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer not spinning
I took off the front panel via 2 screws on the inside of the dryer with the top panel in the maintenance position. Pulled out the tub(cut my hand pretty bad in the process but continued). Did some cleaning and I had to google how the belt tensioner goes into place. Rather difficult on your own i held the belt and placed the tub back into place while placing the belt around the tub putting it in the correct area. thats pretty much it and began reinstalling the parts i had removed.. easy fix now that i have done it once. This is all after my landlords said they werent replacing it and just to have this one hauled off, so all in all i have a 26 dollar dryer now:)
  • john from goldsboro, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
  • Parts Used:
    661570V
31 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Insanely loud squeaking
With the correct parts and watching the video, it was so easy to repair. We ordered the wrong part (for the Electric Dryer when it should have been for the Residential Dryer) but the return was easy and we got the new parts super fast. Next time I would probably look at the offending part first before ordering just to make certain. But we used a socket set and Philips screwdriver and actually had our teens do all the work for experience. Fixed the loud noise one and for all.
  • Stacy B. from MUKWONAGO, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    W10837240, 661570V
15 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer drum was not turning when started.
I moved the dryer to a location where I could get to both the front and back sides. I opened the back by first removing the top cover and then the back. It requires either a Phillips head screwdriver or a quarter inch socket. In addition, it requires removing the four power wires which connect to the computer. If you are unfamiliar with the wiring layout, take a photo with your cell phone which you can then refer to when re-assembling. Once the back was removed, I saw that the belt was still intact, but the pulley which provides tension to the belt was frozen. Take a photo of the belt route between the motor and the pulley. Try to get the spring position in the photo. Remove the belt from the pulley by reducing the tension and then sliding the belt out (this assumes the belt is not broken). The pulley arm is held in place by a single bolt which can be removed by a socket set. Remove the arm with the pulley attached. Examine the pulley to figure out why it is frozen. In my case, the pulley had been frozen for some time and the belt had actually chewed through the pulley and was sliding (polishing) on the pulley axle? I used a pair of pliers to loosen the destroyed pulley by rotating it back and forth over the axle while gripping the arm the axle is attached to. As it loosened up I worked it off the axle. I used a cloth to clean the axle of grime from the belt, pulley, and dryer lint. The new pulley comes with a washer and triangular plastic "fastener". First you put on the washer, then the pulley and then you secure it on the axle by sliding the triangular fastener over the axle so it sits in a small grove near the end of the axle. Then put the pulley arm back by replacing the bolt. Make sure you do not overtighten the arm since it is intended to rotate about the bolt. If the dryer belt breaks, the spring will pull the arm down and throw a cutoff switch. Its operation should be obvious. Once the arm is back in place, refer to your photo and replace the spring (this can be tricky and frustrating, particularly if you don't use something like needle nose pliers). Once the spring is in place, depress it and re-install the dryer belt. Refer to the photo you took earlier if you've forgotten how the belt was routed. Then re-install the dryer's back panel, re-attach the electric wires (again refer to the photo you took earlier), and re-attach the top cover. You might want to test your handiwork at this point before you reconnect the dryer vent
  • Dennis from AUSTIN, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
  • Parts Used:
    661570V, 279640
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud sreeching and vibration
I just followed the videos I received with the order and everything went really well. This dryer was a little different than the video, but the process was the same. The HE3 does require 4 drum rollers and I had only ordered 2. However, there was only one bad roller, so I installed both on the back of the drum. The two front rollers are pretty easy to get to if they go bad. The idler pulley was completely worn out with an 1/8 inch groove worn off to one side. PartSelect made this an easy project!
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no issue at all!
even though my appliance is a little different from video i still was able to repair my appliances based on the video. definitley cheaper than buying a new one!
  • angelo from NATIONAL CITY, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
  • Parts Used:
    661570V, 5304509487, 279640
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start.
With the help of YouTube, I was able to watch videos of how to disassemble and reassemble the dryer. I watched a video showing where the Thermal fuse and Thermostat was located as well as how to test them with a meter. I watched another video showing how to replace the drum belt, showing step by step instructions. Without YouTube it would have been a whole different story!
  • John from HATFIELD, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
  • Parts Used:
    WP3390719, WP3387134, 661570V
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Belt
Started at the top by laying back the control panel, then I removed the top panel, then the front panel, next the drum and the broken belt. before I put it back together in reverse order, I vacuumed the inside of the dryer and the exhaust vent
  • Ken from LOMBARD, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
  • Parts Used:
    661570V
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive pulley broke. Looked like clip holding it on broke and pulley was running crooked.Belt was squealing some a couple of weeks before it broke.
Removed top and back covers. Placed new pulley and retaining clip in place. I had to remove a couple of drum supports to put belt on. Probably didn't have to remove top.
  • Mark from Sheffield, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
  • Parts Used:
    661570V, 279640
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
25 Reviews
4.6
Filter By Rating:
  • 5 Stars
    19
  • 4 Stars
    4
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11722115
Manufacturer Part Number: 661570V
Brand
Model Number
Description
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
10697502820
Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060097990
Dryer
Kenmore
11060182000
Dryer
Kenmore
11060372710
Dryer - Dryer
Kenmore
1106090199
Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts
Kenmore
11060901990
Dryer
Kenmore
1106090299
Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts
Kenmore
11060902990
Dryer
Kenmore
11060904990
Dryer
Kenmore
1106090799
Dryer - Kenmore Dryer Model 110.6090799 (1106090799, 110 6090799) Parts
Kenmore
11060907990
Dryer
Kenmore
11060912990
Dryer
Kenmore
1106092299
Dryer - Kenmore Dryer Model 110.6092299 (1106092299, 110 6092299) Parts
Kenmore
11060922990
Dryer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service