Whirlpool W10779716 - Bake Element | PartSelect.ca
https://partselectca.azureedge.net/Schematics/Whirlpool/4WPIGL0F.gif
See part 7 in the diagram
( Grid squares measure 1x1 inch )
https://partselectca.azureedge.net/Schematics/Whirlpool/4WPIGL0F.gif

Bake Element

Your Price

CAD$76.48
On Order

PartSelect Number PS11703285
Manufacturer Part Number W10779716
Manufactured by Whirlpool

This element is square shape with terminals in the center.

This part works with the following brands: Whirlpool, Maytag, KitchenAid, Jenn-Air, Kenmore.

This part works with the following products: Range.

This part fixes the following symptoms: Element will not heat | Little to no heat when baking | Oven not heating evenly

Videos For installing this part.

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wayne
November 19, 2017
The replacement baking element looks different than my old one, do i need to move brackets over to new one or are there some instructions on how to install the replacement
For model number MER8674AB0
Hi Wayne, Thank you for your inquiry. There is a video on our website that you can reference on how to install the bake element. The element may appear different from yours, but the ends are the same You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!

12 people found this helpful.

Was this helpful?
Kevin
October 24, 2017
I need the lower baking element. The diagram image looks different from the part in my oven. The lower and upper elements connect to the back in the "center" of the oven wall. The parts diagram shows them with an offset to the lower left side.
For model number WFE540H0AS0
Hi Kevin, Thank you for your question. This would be the correct bake element for your appliance. I hope that helps. Good luck with your repair.

7 people found this helpful.

Was this helpful?
Terrence
November 16, 2017
Will a bad oven sensor cause the oven to take an extremely long time to reach selected temperature, and cause food not to cook thoroughly (on the bottom) when the oven says it has reached temperature? If not,can you possibly suggest a cause?
For model number WFE714HLAS0
Hi Terrence , Thank you for the question. Yes the Oven Sensor can cause this.I suggest testing the sensor to see if it is defective.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

6 people found this helpful.

Was this helpful?
Carrie
December 3, 2017
How do I know if I need a new sensor or a new baking element? Oven takes a long time to reach the temperature desired. Once it does, the food is uncooked on the bottom of the pan and overcooked on the top of the pan.
For model number MER8674AW0
Hello Carrie, Thanks for your question. Your issue is more likely due to the sensor, but we would recommend using a multi-meter to test both the sensor and the bake element, and replacing either if they are not showing continuity. I hope this helps.

3 people found this helpful.

Was this helpful?
Related Parts

Oven Sensor

CAD$107.54
In Stock
Tom
November 6, 2019
Looking for 3600 watt baking element for this stove. I asked earlier today and your expert replied with a part no. D29142 . When i looked this part up it is a capacitor kit.You must have sent me the wrong info. Could you send the right no. For a baking element 3600 watts. Thanks
For model number ywfe540h0aso
Hello Tom, Thank you for your question. We apologize for the previous confusion. The part number for the baking element for your model is under part PS11703285. Hope this helps!

3 people found this helpful.

Was this helpful?
Related Parts

Bake Element

CAD$76.48
On Order
Alexandre
January 16, 2020
Does this element fit on my oven (3600w) ?
For model number YMER8880BS0
Hi Alexandre. Yes this part W10779716 is compatible with your model YMER8880BS0. Thank you for your question and good luck with your repair!

3 people found this helpful.

Was this helpful?
George
December 22, 2019
Hi I need an upper element for my Whirlpool stove do you have any and how much
For model number YWFE710H0BS0
Hello George, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11703285. Please enter the part number into the site for the current price and availability. Hope this helps!

2 people found this helpful.

Was this helpful?
Ronald
December 17, 2018
My bottom heating element in my oven has burnt out not sure of my part number looks like w10779716 is this correct
For model number Mer8700DS1
Hi Ronald, Thank you for your question. Yes the correct part for the bake element is W10779716. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Virginia
January 28, 2019
I have Maytag model mer8674ab0 oven that needs a replacement heat element which is under a heat cover. It has a two pronged sections that fits into the bottom middle of the back of the oven. What element is compatible? It is square shaped. The one in the diagram for the oven has the prongs on the left. That is wrong. I need a middle pronged piece. Which do you recommend.
For model number MER8674AB0
Hi Virginia, Thank you for your question. The part number listed under your model number for the bake element you described is PS11703285. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Keith
February 6, 2019
I replaced the thermal fuse-thermostat, checked the heating sensor and it was in range for ohms 1085. Both top and bottom element still will not heat. I checked the wiring harness and there is no burnt or loose wires. Trying to figure out the next step?
For model number MER8674AWO
Hello Keith, thank you for your question. Since the sensor is testing within range and there are no burnt or broken wires on the elements the electronic control board would have to be replaced, Part Number: PS11756979. Good luck with your repair!

1 person found this helpful.

Was this helpful?

Customer Repair Stories

Average Repair Rating: 4.3 / 5.0, 9 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Helen from PURVIS, MS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
W10779716
The oven would take an hour to preheat.
First, we turned on broil and the upper element turned orange and obviously worked. We figured the bottom element went out. The diagram on this site showed a bottom heating element that looked nothing like ours, but after reading other reviews, and reading that part that goes through the back of the oven was in the middle, and not off to the side, we ordered this element. It was perfect. All you have to do is unplug the oven, take out the bottom pan covering the element by removing 2 screws in the back, remove the lower small cover on the back of the oven and then unplug the old element, unscrew the old element on the inside of the stove, then install the new element and put everything back like it was. Nothing to it. It worked like a charm and my oven now heats up fast again. Easiest appliance repair job ever!
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Bryan from ROME, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W10779716
Oven Bake Element bad
1. Unplugged stove
2. Removed two (2) screws from bottom panel in oven cavity
3. Lifted out bottom panel
4. Removed two (2) screws from bake element standoffs.
5. Removed two (2) screws from bake element (Rear of oven cavity)
6. Removed Terminal Block Cover Box by removing two (2) screws and lifting up on it.
7. Removed lugs from the ends of the bake element.
8. Extracted bake element.
9 Inserted bake element through rear opening and attached the two lugs removed in step 7.
10 Inserted two screws removed in step 5.
11. This bake element only had a standoff bracket in the front. Used one (1) screw from step 4. for front standoff.
12 Replaced bottom panel and two screws.
13 Reinstalled Terminal Block Cover Box and two screws.
14. Plugged oven in and tested oven.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Kathy from Midland, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
W10779716
Bake element wasn’t heating properly.
I watched a video on google on how to replace the element and then looked on the internet to order the element. When the part arrived, I pulled the range out and unplugged it. Then I watched the video again and followed the techs instructions to remove the element and replaced it with the new one. It’s a very simple process that I think almost anyone can do . The online videos make the job easier because they show exactly the order of disassembly and assembly, and Part Select helped with finding the right part and shipping it in a timely manner. Thank you!
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Jess from GAYLORD, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W10779716
Would not heat up
Unplug the appliance, remove the bottom cover inside the range and the cover in the rear to unplug the heating element. R&r the element, reinstall the covers and test for proper operation.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
George from YONKERS, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WPW10181986, W10779716
Oven bake element would not get hot
1. Turned off power
2.Removed back oven cover
3.Removed power leads to bake element
4.removed retaining screw for sensor.
5.replaced sensor
6.remove bake element cover
7.removed bake element retain screw
8.replaced and reversed process
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Westley from MADISON, AL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W10779716
Oven would not heat
Opened the breaker for the oven. Verified the power was off. Removed the racks from the oven. Using a screw driver removed two screws in the back of the oven holding down the steam bake bottom of the oven, pulled up from the back to get the pan out. Removed the screw holding the front of the element in place. Removed the screw in the shiny metal of the element at the back. Gingerly pulled the element to the front and as the element stopped slightly turned the element to let the prints come out. That part was challenging to get the angle right so not to damage the wires. Using a small Phillips screw driver I pushed in on the connector latch on the terminal and then pulled the terminals off the element one at a time. Follow all the steps in reverse to install the new one.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Jon from LAKE WORTH, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W10779716
Bake element not working
I pulled the range out from the wall, then unplugged it from the wall outlet. I removed the oven door & set it aside. Removed the screws covering the rear wiring shield, then disconnected the 2 leads from the bake element. Unscrewed the screws holding the oven floor pan, then unscrewed the screws holding in the original element. Replaced it, screwed everything back together, and pushed the oven back against the wall. Took me about 30 minutes, and now the oven works as well as it did when we first bought it.
1 person found this instruction helpful.
Was this instruction helpful to you?
Anthony from FRUITLAND PK, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
W10779716
Lower Element had gone bad. Not able to keep temp up.
1) unplugged rnage from wall
2) took off back plate to unhook electrical from element
3)took door off of range for ease of access
4) removed the 2 screws i the back of tha bottom panel
5) removed 1 screw in front and 1 screw in back to be able to remove old element.
6)remove element and replace with new one.
7) reinstalled both screws and the bottom panle.
8) connected electrical to new element
9) replaced back cover and plugged in unit to wall
10) put range back in place.
1 person found this instruction helpful.
Was this instruction helpful to you?
tim from KEENE, NH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
W10779716
Oven heated really slow, no heat from the bottom of the oven
Very easy followed instructions from a youtube video.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
46 Reviews
4.9
out of 5
Filter By Rating:
  • 5 Stars
    44
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5
-
Verified Purchase
The exact part I required.

The bottom bake element arrived the day after ordering. The installation went exactly as shown on the video. My oven was operational within an hour of receiving the part.

5
-
Verified Purchase
Easy repair

The element came so fast and my oven was back working in no time!! Thank you

5
-
Verified Purchase
Easy repair

The part was in great shape and arrived prior to expectations

5
-
Verified Purchase
Great Experience!

The part came very quickly and was in good shape. I particularly liked the video that came with the receipt of purchase. It was easy to follow, and made the replacement very easy! Thank you!

5
-
Verified Purchase
Bake Element

Received the part in less time than advertised. Stove works great, now!

5
-
Verified Purchase
My oven is working again.

Thank you for getting it here so fast excellent service oven is working great .

5
-
Verified Purchase
Excellent for do it yourself person.

The part came overnight, had it working right away. The mounting was different but the stove had the mounting points that were needed. Price was good to, I recommend it to all my friends.

5
-
Verified Purchase
Fast delivery

Easy fix,no problems at all

5
-
Verified Purchase
The right part for my oven. Works great.

Arrived fast with no extra charges.

5
-
Verified Purchase
baking element

the part came fast and was in perfect condition. But my range in not working when the baking element sparked and caught fire it blew the board. So we had to replace the range.

Model Cross Reference

Brand
Model Number
Description
Kenmore
664C95123610
Range - ELECTRIC SLIDE
Kenmore
66542783710
Range - SLIDE
Whirlpool
IEL730CS0
Range - ELECTRIC SLIDE IN RANGE
Whirlpool
IEL730CS1
Whirlpool
IEL730CS2
Range
Jenn-Air
JDS1450CDP0
Range - SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS1450CDP1
Range - SLIDE
Jenn-Air
JDS1450CDS0
Range - SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS1450CDS1
Range - SLIDE IN DUAL FUEL RANGE
Whirlpool
JDS1450CFP0
Whirlpool
JDS1450CFS0
Jenn-Air
JDS1450DP0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1450DP1
Range - DUAL FUEL RANGE
Jenn-Air
JDS1450DS0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1450DS1
Range - DUAL FUEL RANGE
Whirlpool
JDS1450FP0
Whirlpool
JDS1450FS0
Jenn-Air
JDS1750CEP0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1750CES0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1750EB0
Range - RANGE
Jenn-Air
JDS1750EB1
Range - SLIDE
Jenn-Air
JDS1750EP0
Range - DUAL FUEL RANGE
Jenn-Air
JDS1750EP1
Range - SLIDE
Jenn-Air
JDS1750ES0
Range - RANGE
Jenn-Air
JDS1750ES1
Range - SLIDE
Jenn-Air
JDS1750FB0
Range - SLIDE
Jenn-Air
JDS1750FP0
Range - SLIDE
Jenn-Air
JDS1750FS0
Range - SLIDE
Jenn-Air
JES1450CDB0
Range - ELECTRIC RANGE
Jenn-Air
JES1450CDB1
Range - ELECTRIC SLIDE

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2021, Eldis Group Partnership. All rights reserved.