Refrigerator and Freezer Light Board Specifications
The board fits behind the light lens and has LED lights that illuminate the interior of the refrigerator or freezer compartments.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Light not working
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, Maytag, Amana, Whirlpool.
Part# W10695459 replaces these:
AP5971112
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
LED Light stopped working
Removing the old unit was difficult. The light was clearly designed for installation not for ease of repair. Since I was concerned about marring the surface of the refrigerator I used a paint scraper to get under the lip of the light and another smaller paint scraper to lift the unit away from the body of the refrigerator. It does not just "pop off". I eventually did get it free without any damage to the wall of the refrigerator. The repair was then very easy. There was a connector that was easy to separate allowing for the removal of the old unit without cutting any wires. The new unit had a mating connector, which easily connected to the old connector in the refrigerator. After some pushing I was able to install the new unit into the hole in the refrigerator. It does not exactly "snap in".
Other Parts Used:
Paul from SUDBURY, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
16 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lights out in main refrigerator
researched on line and found the wiring was in series and I the suggestion was to replace the first light in the series that was in the freezer. Ordered the replacement light board and took out the existing light and pooped in the new one. Lights now all work! 15 minutes at tops.
Other Parts Used:
fred from CHESTERFIELD, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
12 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It's a 8 light panel it's on series one goes down light drops to lower. I didn't care but my wife did
Remove first cover remove the light panel and replace it Install everything back...
Other Parts Used:
Carlos from PICO RIVERA, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part was substituted, won't work, you did not send my light board
From Donna Turner acct # 190766
I ordered Refrigerator/freezer light board PS11702378
You substituted for a single light module
I troubleshooted and decided to order from your company the light board. You changed my order. I researched what you sent and thought, ok, we'll identify the one light that is out and replace only that...
My paid electrician spend well over an hour inside the frig, and confirmed that all 3 lights in fact work fine, and the problem is above the wiring harness, and what you sent is not correct.
The package has been opened. You substituted my ordered part, it did not remedy the problem, I want a full refund, including S&H
Please advise/sent me Return Authorization, whatever your company policy is.
Thank you. Donna Turner
Other Parts Used:
Donna from MINEOLA, TX
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
27 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Burl
December 19, 2019
Led light quit working. I changed the inverter (led driver) board all the lights worked except the three lights on the top that were were flickering. I checked this circuit as there are three light circuits coming off the inverter and found the red wire on the inverter that goes to the white and red strip on the plug for the three lights to be open. I fished a wire thru where the water line goes thru the case and rand a replacement wire fro the red wire on the inverter to the white with red strip on the three light cluster, This made all the lights work again.
For model number WRF990SLAM02
Hi Burl, thank you for offering your installation insight! Let us know if you have any questions.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Brett Ashley
March 4, 2019
How many replacement bulbs come within this purchase? Since there are a total of 5 lights in the fridge does that mean this is a 5 pack for $74.04?
For model number KSC24C8EYY02
Hello Brett, it appears that they are sold individually, and not a pack. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 23, 2019
Hi: All but two of the led lights in my fridge and freezer went out simultaneously several months ago. The top two left lights remained on. Please tell me how to repair it. Thank you.
For model number WRF989SDAM02
Hello Mike and thanks for writing.
As both lights went out simultaneously, it is safe to assume you need to replace the light module part # PS11702378. We hope this helps. Please contact us anytime.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 12, 2018
How do I remove and install the light module ps11702378 without damaging it?
For model number KSC24C8EYY02
Hi Paul, Thank you for the question. You will need to pry the module out with a small flat head screw driver. It should just pop out. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
July 21, 2021
How do you replace lights in frig and freezer?
For model number KRFF507HWH00
Hello Patrick, Thank you for the question. Once power is turned off to the appliance, you will just need to depress the tab on the housing to release the light and housing and unplug the wire harness to remove. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
October 18, 2021
The ceiling and freezer lights do not work. The side lights still do. I probably need a new light board of some type. Do your boards also come with instructions for installation. Thanks
For model number WRF767SDHZ00
Hello Tom, Thank you for the question. You will need to pry the module out with a small flat head screw driver. It should just pop out. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Russ
March 16, 2023
Only the top 5 lights by water filter are out. Refrigerator is 3 years old. All other lights in freezer, and outside water dispenser lights work. What do I need to purchase and how do we replace this?
For model number KRFF507HPS01
Hello Russ, thank you for the question. According to our research, we recommend replacing the LED light assembly, part number PS12349214. Once power is turned off to the appliance, you will just need to depress the tab on the housing to release the light and housing and unplug the wire harness to remove it. Also, you need to replace the LED light module, part number PS16218086. You will need to pry the module out with a small flathead screwdriver. It should just pop out. We hope this is helpful!
5 lights upper fridge are very dim all other fridge lights ar fine and freezer light is out. LED modules? Board? Help please and Thank-you
For model number Wrv986fdem01
Hi James,
Thank you for your question. If the lights in the refrigerator are not working there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switches, the refrigerator and freezer light boards and the control module. We have included a link that you may reference on how to check some of these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Top 5 lights and freezer light are not working. Side lights are OK
For model number WRX986SIHZ00
Hi Rogelio,
Thank you for your question. If the lights in your refrigerator are not working, there are some parts that you will need to check to see which one is causing the issue. You will need to check the light switches and the light boards. We have included a link that you may reference on how to check some of these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
All 5 top interior lights in the cooling compartment and the 1 light in the freezer rapidly flicker (the 2 lights on each side of the cooling compartment do not as well as the 2 in the meat/cheese drawer). None of the lights are "burned out" or appear dim. Any suggestions
For model number WRX988SIBM03
Hi David,
Thank you for your question. If the lights are flickering inside the refrigerator, you will need to check the door switches, the refrigerator and the freezer light board, the LED emitter control board and the light module. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
