Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tihomir C - September 7, 2018
Verified Purchase
Great part
The part was a perfect fit .
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Face Clips on dispenser drawer
I unclipped the old drawer parts from the broken drawer and replaced the old parts onto the new drawer and slid the whole drawer back in the washing machine. It took longer to type this that it did to repair the washer. No tools needed at all.
Other Parts Used:
david from spring hill, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
13 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
i broke the soap dispenser on my washer
love parts select have used them several times for parts great company
Other Parts Used:
GLENN from MADISON, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken front on dispenser drawer
Despite putting all the information about my washer in the order, I received a dispenser drawer that was similar to the one I needed, but would not fit. It was also a slightly different color than the original part on my machine, so obviously someone just threw it in a box and sent it to me. It wasn’t even wrapped in plastic! Just the part in a box, no instructions, no bill of sale, nothing. When I needed to return it because it wasn’t the proper part, I HAD TO PAY THE $10.00 TO SHIP IT BACK!!! Really poor customer service in my opinion. Hopefully I will at least get a credit for the incorrect part that I had to pay to return.
Other Parts Used:
Helen from AURORA, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ernie
December 7, 2017
I am looking for the dispenser cabinet pull handle, part 48 in your diagram for sears washer model 41741122310 . I see the part number but don’t see how to order it online
For model number 41741122310
Hi Ernie,
Thank you for your question. The only one we have left available is the white version. I have linked that part down below for you. Once you click on that part you will see an Add to Cart button, which will then take you through the check out process. You can also contact our customer service to help you order as well. Good luck with your repair.
Where does the drawer magnet go.. the diagram showed very little
For model number GLTF2940ES0
Hi Alice, please watch our video on replacement here https://www.youtube.com/watch?v=hSH4XIvg5qU . Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robin
November 12, 2017
My detergent dispenser does not empty during the the entire wash cycle. I have cleaned it and the area surrounding it. Nothing seems to work. Should I replace the drawer or would it be something else?
For model number FTF2140ES0
Hi Robin, Thank you for the question. If the dispenser has been cleaned out and there is no clogs preventing the soap from dispensing ,the issue would be with the solenoid (water valve) on the back of the dispenser.The solenoid opens up and send water into the dispenser to flush the soap into the washer.The Solenoid is only sold as part of the Water Valve and Dispenser Assembly so the full Water Valve and Dispenser Assembly,PartSelect Number PS2378371 will need to be replaced.Hope this helps!
My unit didnt come with a liquid detergent dispenser. Is one available? The insert i see in the user manual?
For model number Fafs4073nw0
Hello Todd, Thank you for your inquiry. Since we do not show a complete assembly for your model, you would need the drawer housing-part# 134446130, the cover-part# 134370200, the drawer part# 134370000, the conveyer part# 134370100, the handle part# 137516611, the frame part# 137286005 and the conveyor part# 134370100. Hope this helps!
Was this helpful?
Thank you for voting!
Carrie
April 24, 2023
Hello the front plate broke off the dispenser tray. Those white clips broke. It’s the front plate that you remove from the dispenser tray video. This unit is a white Electrolux Affinity Front Load Washer. Any help would be appreciated.
For model number FAFW3921NWO
Hi Carrie, thank you for contacting us. We have researched the model and it seems that the part you are looking for is the Dispenser Drawer Handle Frame, part number PS3492783. It has clips that attach to the dispenser drawer bin. If you require assistance to place an order, please contact customer service!
These valves are where the water supply from the house attach to the washing machine. You connect the hoses to the valve with fill hoses. The fill hoses should have screens installed in them to prevent debris from ente...
