Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
July 31, 2018
If this part was faulty would the display not light up?
For model number SCB1001MSS001
Hi Tom,
Thank you for your question. The power board could be causing the issue, but the issue may be with main control board, part number PS1018486 or the display control board, part number PS1022528. You will need to test the parts with a multimeter to see which ones are causing the issue. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Brian
January 19, 2020
My microwave works intermittently. It will shutoff with a blank display screen and no internal light. The microwave appears dead. Then, all of a sudden, it powers back up the the “time set” prompt on the display. Will this part solve that issue? Thanks!
For model number PSB1001NSS 01
Hello Brian, thank you for your question. We would recommend testing a few parts before replacing the board. We would recommend checking the fuse to be sure it is in position. Also check the door switches to be sure they are not faulty. If the door switches are ok, the issue is most likely the power board. I hope this helps.
Was this helpful?
Thank you for voting!
Lord
June 7, 2023
My microwave went totally dead after I used it and closed the door. I think I tested the door switches correctly, and changed the fuse, but the door switch monitor interlock switch intermittently showed continuity (the top switch on the right side of door). What ohms should be displaying if continuity is good? I'm DIYing, and know nothing about what I am doing, just following tips from the internet.
For model number SCB1001MSS01
Hi Lord, thank you for contacting us. If the multimeter shows a reading of 0 ohms, this will indicate that the switch has continuity. We would suggest checking the power board, part number PS1020967, for continuity using a multimeter. We hope this helps!
Was this helpful?
Thank you for voting!
Sam
December 16, 2023
GE microwave Advantum stays on with power and heating when the door is closed
Is the a bad PCB board?
For model number PSB1001NSs 01
Hi Sam, thank you for contacting us. If your microwave stays on and heating as well, then the issue is most probably with the main control board, part number PS1020967. It manages the power to various microwave functions such as heating, lighting and turntable operation. You may need to replace it to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.