Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Derek
October 24, 2017
This is a Maytag stove with the model number given. The part that you use to set and control the oven and it displays temp does not work. If i order one is it fairly easy to install? Can it be something else causing that panel not to work?
For model number MES5552BAB
Hi Derek,
Thank you for your question. You could check your wiring to see if perhaps something was damaged or burned. Replacing the part is fairly easy. I would suggest taking a picture of your board while your wiring is all attached. You can hold up your new board to the old board and unplug a wire then plug it back in to the new board in the same spot. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Thomas
May 13, 2019
The lower element was obvious a problem. Working on oven for my son. Photo sent to me of blown element was a serious failure almost completely burned through element. Stove works but no one mentioned oven control panel wasn't operating at all. Replaced element knowing that wouldn't fix everything. Dug deeper and found significant burn marks on what i think is the oven control board, a two level stacked board behind oven control panel. Am i on the right track replacing that board set? Its obviously bad as well but are odds in favor the control board and element took each other out or is it possible something else killed them both? Much more expense and i would consider just replacing the oven.
For model number MES5752BAS17
Hello Thomas, thank you for your question. Yes, it definitely sounds like the electronic control boards should be replaced. If there is burn marks on it and neither element works, the oven electronic board is the most likely issue. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Randy
November 27, 2018
Lower element in oven doesn't come on when bake option is selected. Upper element comes on when bake or broil option is selected. Oven temp rise is very slow also.
For model number WDE150LVQ01
Hello Randy, thank you for your question. If the bake element is not coming on you will want to replace that part. The part number is PS11752540. Please enter the part number into the site for current price and availability. Good luck with your repair!
This is the part for manufacturer no. W10769823, cost $197.14 is this part new or refurbished?
Hello Alan, Thank you for the question. All the parts we sell are OEM Brand new never used parts. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Stephan
December 8, 2023
My oven will only come to 250 degrees when set at 350. If set at 400. It won't stop heating goes to 450 and beyond.I don't know the no. Of the circuit board
I need.
For model number Mer8775as
Hello Stephan, Thank you for reaching out. Before replacing the Control Board (Part #: PS11756982 for White and Part #: PS11756559 for Black), we suggest testing the Oven Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
How do I switch this part from Celsius to Fahrenheit
For model number WDE150LVS0
Hello Barbara, Thank you for your inquiry. Researching your model, press and hold the CANCEL and BAKE buttons for 3 seconds. A single beep should sound and the current setting will be displayed. Then you can use the up or down arrows to change the setting. Wait 5 seconds and then it should be complete. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
