Imagine having total control over your refrigerator's water and ice dispenser functions - that's exactly what you'll get with this Whirlpool Dispenser Electronic Control Board. Designed to fit perfectly into multiple models of brands you trust like Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, it's all about simplicity and seamless operation. Here's why this could be the ideal solution to your current problem: This genuine OEM part features an easy-to-use stainless-steel touchpad and takes charge of managing your fridge's water and ice dispensing system. So, if your refrigerator isn't operating as it should, this is the kind of reliable fix you need to bring it back to its prime. Getting started is straightforward too. Just remember to unplug your appliance and safely tuck away any fresh food somewhere cool during the replacement process. To avoid any nicks or cuts, please use work gloves throughout the installation. So, why not bring your refrigerator back to its best? With this handy Whirlpool Dispenser Electronic Control Board, it's easier than ever.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag.
Part# W10740217 replaces these:
W10164471, W10316089, W10708489
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Colin H - March 9, 2023
Verified Purchase
Good parts
The electronic control boards went in very easy and solved the problem with our fridge. excellent service good parts
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
January 27, 2022
My fridge door ice dispenser will only work once a day.
For model number MFI2569VEM
Hello Dan, thank you for writing. We have researched the model you have provided and have found the part you are looking for is the Chute Assembly Number PS11738680. We hope to hear from you soon.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Anthony
December 14, 2024
My Maytag refrigerator display will not light up anymore. I push a button it lights up beeps as soon as I let the button go it goes dark again.what do I Need
For model number MF 12269VEM 11
Hi Anthony,
Thank you for your question. If the display is no longer working, it will need to be replaced. The part number for the electronic control board is PS10060177. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Hattie
April 14, 2023
Can I get installation instructions for Part # W10740217 ??
Hello Hattie, thank you for contacting us. Based on our research, we are providing you with the instructions that will assist you in replacing the dispenser control board.
1- Use the heat gun to heat the touchpad to break the glue.
2- Use a putty knife to start peeling from one of the corners.
3- Pull out the drip tray by using both hands.
4- Remove the screws at the bottom of the dispenser cover.
5- Insert the flat-blade screwdriver into the side and pry all the cover off and lift it away.
6- Disconnect the wire plug from the board.
7- Replace the touchpad and board on the dispenser cover.
We hope this helps!
Was this helpful?
Thank you for voting!
Richard
May 13, 2024
My fridge is working, just recently the display and all the lights went dark then came back on, another incident was the ice light would not switch over to water when going back and forth, trying to be somewhat prepared????
For model number MFI2569YEM0
Hello Richard, thank you for reaching out. We have concluded that the issue is with the dispenser control board and panel assembly, part number PS10060177. You will need to replace it to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing help...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Refrigerator-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"W10740217","title":"W10740217","url":""}]
