This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
$18.74
In Stock
Order within the next 8 hrs and your part ships today!
This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them ...
$39.39
In Stock
Order within the next 8 hrs and your part ships today!
At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.
$36.18
In Stock
Order within the next 8 hrs and your part ships today!
This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and thre...
$56.91
In Stock
Order within the next 8 hrs and your part ships today!
Also known as the door boot seal. This part includes the drain and plug. The seal is located around the door of the washer to prevent water from leaking.
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$20.81
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for MHW2000AWW
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug Stacie
December 18, 2019
Washer does not empty and makes loud noise
For model number MHW2000AWW
Hello Doug, thank you for your question. If the unit will not drain, the first part we would recommend replacing is the drain pump Remote Style Pump with Motor - 120V 80W PartSelect Number: PS11739411. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
December 5, 2022
I need a motor for this washer.
For model number MHW2000AWW
Hello Jim, thank you for asking. We have researched your model and found that the motor you are looking for is part number PS3500892. It runs at 1/4 horsepower and carries 4.5 amps. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job. Thank you.