This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
The start ...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$31.99
In Stock
Questions And Answers for MFI2568AEB
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
August 2, 2021
The ice maker does not always flip ice out of the trough. It makes ice for awhile then the cubes seem to get stuck in the maker
For model number MFI2568AEB
Hello Steve, Thank you for contacting us. We have researched the model you have provided and have found
the part you are looking for is PartSelect Number PS8260210. You will need to replace the complete icemaker as it has become defective.
The part that goes on the door to seal it when you shut it is missing on a used one we just bought, and need to know what part number is and where can i order one? It looks like it would hook into a clasp at the top of the doors when they are shut to keep the doors sealed.
For model number MFI2568AEB
Hi Linda,
Thank you for your question. The part number listed under your model number for the door gasket is PS11754715. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Hello Esppy, thank you for writing. We have researched the model you have provided and have found the part you are looking for is the Electronic Control Board on the outside left side door PartSelect Number PS12349472. We hope this helps.
how do I replace the compressor ? the compressor runs but does not cool the fridge
For model number MFI2568AEB
Hello Alvin, thank you for your question. The compressor Kit is PartSelect Number PS2580803. This is the mechanics (motor/engine) of the cooling system. It kicks in whenever the thermostat demands cooling. ***NOTE: This part needs to be installed by a trained professional in appliance repair. It requires special tools and knowledge to do so. We hope this helps.
Was this helpful?
Thank you for voting!
John
March 23, 2023
How do you replace a leaking water line on this model?
For model number MFI2568AEB
Hello John, thank you for the question. Follow the following instructions to replace the water line:
1. Open the refrigerator doors and remove the shelves on the right side.
2. Pull down the cupboard and remove the water filter.
3. Push the cover hinge off the hinge pin on either side and slide the cover.
4. Unlock the tabs using the screwdriver.
5. Open the cover rocket side-to-side to free the bottom tabs and remove the cover.
6. Release the tabs on the upper cover and remove the cover.
7. Unclip all the water tubes from the bracket.
8. Press the locking skirt at the top left water inlet valve port and pull out the clear tube.
9. Get to the top of the fridge, remove the cover on the left side, and pull the old icemaker tube out.
10. Insert the end of the new tube into the opening on the top and feed it through.
11. Slide the end of the waterline into the water inlet valve port and make sure it's not coming out.
12. Tag the water lines into retainers.
13. Install the upper cover, install the lower cover, and install the water filter.
14. Install the shelves back.
We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and cleaning the shelf/bins. PartSelect was awesome BTW!
.gif "SUPPLEMENTAL INFORMATION Diagram and Parts List for Maytag Refrigerator")
