Models > MDE2301AZW

MDE2301AZW Maytag Dryer - Overview

Sections of the MDE2301AZW

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Drum Support Roller Kit – Part Number: 12001541
Drum Support Roller Kit
★★★★★
★★★★★
(54)
PartSelect #: PS1570070
Manufacturer #: 12001541
This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once.
$34.33
  In Stock
Roller Shaft – Part Number: WP6-3129480
Roller Shaft
★★★★★
★★★★★
(1)
PartSelect #: PS11743031
Manufacturer #: WP6-3129480
This roller shaft is the axle for the drum roller, also known as drum roller axle.
$12.51
  In Stock
Retaining Ring – Part Number: WP9703438
Retaining Ring
★★★★★
★★★★★
(3)
PartSelect #: PS11746909
Manufacturer #: WP9703438
This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.
$10.05
  In Stock
Multi Rib Belt - 91-5/8 Inches – Part Number: WP33002535
Multi Rib Belt - 91-5/8 Inches
★★★★★
★★★★★
(12)
PartSelect #: PS11741110
Manufacturer #: WP33002535
At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.
$36.18
  In Stock
Lint Filter – Part Number: WP33001808
Lint Filter
★★★★★
★★★★★
(17)
PartSelect #: PS11741075
Manufacturer #: WP33001808
This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and thre...
$56.91
  In Stock
Idler Pulley Wheel and Bearing – Part Number: WP6-3700340
Idler Pulley Wheel and Bearing
★★★★★
★★★★★
(7)
PartSelect #: PS11743032
Manufacturer #: WP6-3700340
This idler pulley wheel is white and made of plastic. It is two inches in diameter and comes with a center bearing.
$28.19
  In Stock
Drum Roller Shaft Washer – Part Number: WP312535
Drum Roller Shaft Washer
PartSelect #: PS11740748
Manufacturer #: WP312535
This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.
$17.58
  In Stock
Door Catch Kit – Part Number: LA-1003
Door Catch Kit
★★★★★
★★★★★
(9)
PartSelect #: PS2162263
Manufacturer #: LA-1003
This kit comes in two pieces: the catch and the clip.
$41.24
  In Stock
Idler Pulley Shaft Washer – Part Number: WPY312527
Idler Pulley Shaft Washer
★★★★★
★★★★★
(2)
PartSelect #: PS11757538
Manufacturer #: WPY312527
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
$17.15
  In Stock
Door Latch Kit – Part Number: 306436
Door Latch Kit
★★★★★
★★★★★
(9)
PartSelect #: PS2029855
Manufacturer #: 306436
This dryer door latch kit comes in two pieces: a door latch, and a door strike. It's used to help hold your door shut to your dryer.
$12.96
  In Stock
Dryer Drum Felt Seal – Part Number: WP33001807
Dryer Drum Felt Seal
★★★★★
★★★★★
(4)
PartSelect #: PS11741074
Manufacturer #: WP33001807
This seal can be used for the front or rear drum. Adhesive is NOT included. For adhesive search: WPY055980
$20.31
  In Stock
Tall Baffle – Part Number: WP33002032
Tall Baffle
★★★★★
★★★★★
(8)
PartSelect #: PS11741085
Manufacturer #: WP33002032
This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle. NOTE: Screws are NOT included.
$53.07
  In Stock

Questions And Answers for MDE2301AZW

Be the first to ask our experts a question about this model!

Common Symptoms of the MDE2301AZW

[Viewing 6 of 6]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
noisy rollers, broken latch
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
Thank you.
Parts Used:
Door Latch Kit Drum Support Roller Kit
  • gerry from west covina,, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable), Wrench set
647 of 674 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint into venting area.
Removal of old lint collector and replace with new one.
Parts Used:
Lint Filter
  • Anthony from DeKalb, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
512 of 532 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old lint screen had a couple tears in it
No problem at all, just took out the old one in front and slid in the new one.
Parts Used:
Lint Filter
  • Ron from Monte Vista, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
378 of 386 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!