This is a replacement mullion rail for your French door-style refrigerator. You will typically find the mullion rail on the left side refrigerator door. The mullion rail helps to keep the refrigerator...
This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities tha...
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cov...
This is a replacement door mullion spring for your refrigerator. The door mullion is the flap that allows the doors on your French-door style refrigerator to close. The spring allows the mullion to fi...
$53.35
In Stock
Questions And Answers for LFX28968ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
June 6, 2023
I would like to know what wattage my Refrigerator requires to run. I am trying to figure out what generator I need for my home. Could you please advise at your earliest. Thank you.
For model number LFX28968ST
Hi John, thank you for reaching out. According to our research, your model requires 120 Volts and 15 Amps, or 1800 watts to run. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
December 2, 2021
Hi there, I need to purchase the ice maker assembly but I’m having a hard time finding the right one. I don’t need the auger assembly, just the ice making part. Can you guide me into the right direction?
For model number LFX28968ST
Hello Mike, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS7788168. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Margaret, thank you for reaching out. According to our research on the model, the problem appears to be with the Defrost Sensor Assembly, part number PS3636324. Customer service is available 7 days a week if you need help placing an order. We hope this helps!
Hello Cathy, thank you for contacting us. The most probable cause of the issue is a faulty ice bin assembly, part number PS7789317. It stores the ice until needed and comes with an auger that rotates to move the ice into the dispenser chute. We would also recommend inspecting the micro switch, part number PS3529276. It controls dispensing of ice or water when you press the dispenser lever. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.