This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
$7.99
In Stock
Order within the next 11 hrs and your part ships today!
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
$7.99
In Stock
Order within the next 11 hrs and your part ships today!
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire si...
$66.99
In Stock
Order within the next 11 hrs and your part ships today!
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
$105.99
In Stock
Order within the next 11 hrs and your part ships today!
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
$54.99
In Stock
Order within the next 11 hrs and your part ships today!
This bin can be moved according to space needed. It holds items on the door of your refrigerator.
NOTE: This bin is only available in clear plastic now.
$116.99
In Stock
Order within the next 11 hrs and your part ships today!
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts a...
$41.99
In Stock
Order within the next 11 hrs and your part ships today!
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
$215.99
In Stock
Order within the next 11 hrs and your part ships today!
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
$158.99
In Stock
Order within the next 11 hrs and your part ships today!
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
$100.99
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for LFSS2612TF0
Ask our experts a question about this model and we'll get back to you as soon as possible!
30 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phyllis
January 20, 2020
I am looking for replacement light bulb which is located in the freezer and refrigerator
For model number LFSS2612TF0
Hello and thank you for writing.
Light bulb PS12364857 is in the list of compatible parts for your model and is sold individually. We hope this helps. Please contact us anytime if you require further assistance.
Need to replace part 4 clear bottom shelf of refrigerator door. Found on site but not how to order.
For model number LFSS2612TF0
Hello Shirley, thank you for your question. The part number for that bin is Part #: PS12364199. You can place the order online or by calling our customer service center. Our phone number is 888-260-4310. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Sarah
February 4, 2020
I am look for a price on the bottom shelf in the refrigerator door
For model number LFSS2612TF0
Hello and thank you for writing.
The refrigerator door shelve is part number PS12364199. If you would like to place an order with our company or inquire about pricing, availability, and shipping, you will have to contact our customer service. You can do so one of two ways: online: www.partselect.com or telephone: 888-738-4871. Thank you.
How to change the water filter of my refrigerator?
For model number LFSS2612TF0
Hello Fernando, thank you for reaching out. The water filter is located on the top right side of the refrigerator compartment. Use the following instructions to replace the water filter:
1. Turn off the ice maker.
2. Remove the filter by pushing on the end of the filter.
3. Slide the old water filter cartridge straight out of the housing and discard it.
4. Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing.
5. Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector).
6. Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal.
7. After filling one glass of water, continue flushing the system for about four minutes.
8. Turn On the ice maker.
9. Press and hold the water filter button on the ice and water dispenser control panel for three seconds. When the display changes from "Red" to "Green," the status has been reset.
We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rogina
July 12, 2022
I am looking for the rack that the deli drawer slides on. Ours cracked in the middle, the glass is fine.
For model number LFSS2612TF0
Hello Rogina, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2363832. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
