Models
>
KSCS25INSS00
KSCS25INSS00 KitchenAid Refrigerator - Overview
Sections of the KSCS25INSS00
[Viewing 12 of 12]
Manuals & Care Guides for KSCS25INSS00
Click to downloadKeep searches simple, eg. "belt" or "pump".
Refrigerator Lower Door Closing Cam
PartSelect #: PS11739042
Manufacturer #: WP2182179
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
$9.77
In Stock
Refrigerator Touchup Paint (White)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.15
In Stock
Refrigerator Bimetal Defrost Thermostat
PartSelect #: PS11750673
Manufacturer #: WPW10225581
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
$39.19
In Stock
Refrigerator Door Switch
PartSelect #: PS12728638
Manufacturer #: W11384469
Door switch turns the light off when you close the door.
$48.68
In Stock
Ice Maker Control Assembly
PartSelect #: PS2341896
Manufacturer #: W10190935
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
$150.25
In Stock
Refrigerator Cap Water Filter (Black)
PartSelect #: PS11739970
Manufacturer #: WP2260518B
This black cap covers the water filter.
$33.72
In Stock
8 Cube Ice Maker Assembly
PartSelect #: PS869316
Manufacturer #: 2198597
This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and attach to the new.
$174.09
In Stock
Door Shelf Bin
PartSelect #: PS11739816
Manufacturer #: WP2223860
This part has a clear plastic front. The bins are sold individually.
$89.61
In Stock
Light Bulb - 120V 25W
PartSelect #: PS11747806
Manufacturer #: WPA3073101
This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.
$21.68
In Stock
Refrigerator Ice Guide
PartSelect #: PS11739026
Manufacturer #: WP2180224
This ice guide is located in the freezer door.Turn off the ice dispenser before replacing this part.
$24.68
In Stock
Questions And Answers for KSCS25INSS00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
March 17, 2020
The outside of the wall between the fridge and the freezer seems very hot. I'm talking about the area where the doors close to. I checked it with my infrared thermometer, it is 147 degrees. The fridge and the freezer seem to be working fine, it keeps things at the proper. Is this normal?Thanks
For model number KSCS25INSS00
Hello Jim, thank you for your question. It is normal for this part to be quite warm, but it should not be as hot as you are describing. The condenser fan motor, PartSelect number PS1957416, is more than likely causing this issue. You will want to check this motor to be sure it is running as it should. If there is debris blocking the fan blades from circulating the air over the condenser coils, this symptom may arise. If there is nothing blocking the fan blades, and the motor is not working as it should, it is recommended that this part be replaced. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Danny
March 6, 2025
My refrigerator runs for several hours then turns off and beeps and the lights flash, has anyone had that problem? What could it be?
For model number KSCS25INSS00
Hello Danny, Thank you for contacting us. Researching your model, this usually indicates an issue with the control board or the wiring. We would recommend checking the main control board and inverter board for the compressor. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
July 13, 2021
Lost freezer and cooler temperature
For model number KSCS25INSS00
Hello Frank, Thank you for the question. If the Temperature inside the Freezer is too warm, we suggest testing the Bi-Metal Defrost Thermostat. The best way to do this is to remove the Thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. Hope this helps
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Refrigerator Bimetal Defrost Thermostat
$39.19
In Stock
Tim
June 14, 2022
Model was manufactured 2005, can you give me dimensions and compartment capacity. Unfortunately it is getting old and needs to be replaced. Thanks
For model number KSCS25INSS00
Hello Tim, Thank you for contacting PartSelect.com. Very sorry but we do not have the size of the appliance, just parts lists and diagrams. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the appliance directly. We hope this helps!
Was this helpful?
Thank you for voting!
Michael
January 22, 2020
Light bulb quit working and tried new e17 bulb from 3 different sources. The good bulb on the other side worked in the socket with the bad bulb, so socket seems ok.
For model number KSCS25INSS00
Hi Michael, thank you for your question. If your light is still not working then you may have to take a look at the socket, wiring, and light switch for being the issue. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Common Symptoms of the KSCS25INSS00
[Viewing 22 of 22]Ice maker not making ice
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Light not working
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Freezer not defrosting
Fixed by
these parts
these parts
Show All
Clicking sound
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Fridge too cold
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Freezer too cold
Fixed by
these parts
these parts
Show All
Too warm
Fixed by
these parts
these parts
Show All
Fridge runs too long
Fixed by
these parts
these parts
Show All
Won’t start
Fixed by
these parts
these parts
Show All
Ice maker dispenses too little ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No ice
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Parts Used:
-
Daniel from Suwanee, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
564 of 684 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
there were directions
We didn't know where the product went and it was very difficult to install.
Parts Used:
-
Kate from Jacksonville, FL
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
754 of 1277 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped functioning
Remove the icemaker service door... gently pry the door pins from the hinge sockets. Remove the 3 screws from the under side of the icemaker with a nut driver (1/4"). Gently remove the icemaker . It's a tight fit between the top of the compartment and the icemaker lower support tray. Next, disconnect the electrical connector at the right side. You're done! Reverse procedure for installing. Good luck. Remember, your working with cold plastic...take your time and don't force too much.
Parts Used:
-
Phil from Auberry, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
460 of 489 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!