Models
>
JMC8130DDB
JMC8130DDB - Overview
Models starting with JMC8130DDB
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Glass Cooking Tray
PartSelect #: PS11744901
Manufacturer #: WP8172138
This tray rotates in your microwave ensuring more even temperatures.
$105.15
Special Order
Ceramic Fuse - 20 amp
PartSelect #: PS11747931
Manufacturer #: WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
$12.99
In Stock
Order within the next 3 hrs and your part ships today!
Micro Switch
PartSelect #: PS3522738
Manufacturer #: 3B73362F
$18.42
In Stock
Order within the next 3 hrs and your part ships today!
Door Interlock Switch Kit
PartSelect #: PS373050
Manufacturer #: 4392027
This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.
$114.46
In Stock
Order within the next 3 hrs and your part ships today!
Light Bulb
PartSelect #: PS11745088
Manufacturer #: WP8183592
Sold individually.
$49.46
Special Order
Glass Cooking Tray
PartSelect #: PS3517413
Manufacturer #: 1B71961H
This tray rotates in your microwave ensuring more even temperatures.
$75.70
In Stock
Order within the next 3 hrs and your part ships today!
Shaft,Turntable
PartSelect #: PS3522924
Manufacturer #: 4370W3A001A
$10.42
In Stock
Order within the next 3 hrs and your part ships today!
Turntable Motor - 60 Hz.
PartSelect #: PS2338877
Manufacturer #: W10207571
This motor rotates the glass turntable in the microwave.
No Longer Available
Capacitor
PartSelect #: PS11743000
Manufacturer #: WP59001168
$156.38
In Stock
Order within the next 3 hrs and your part ships today!
Magnetron
PartSelect #: PS3529034
Manufacturer #: 6324W1A001L
This part is used to generate microwave energy/heat.
$230.54
In Stock
Order within the next 3 hrs and your part ships today!
Common Symptoms of models starting with JMC8130DDB
[Viewing 4 of 4]No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I dropped and broke the glass cooking tray
After shopping all over town trying to find a new tray I discovered PartSelect.com, I called and ordered the tray and received it the next afternoon. It couldn't have gone smoother.
Parts Used:
-
Tami from Quincy, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
471 of 474 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cooking Glass Tray was broken
EXCEPTIONAL service! WOW! Order it Thursday online and it arrived Saturday. I will definitely use your service again. Thank you again!!
Mr. & Mrs. Charles
Mr. & Mrs. Charles
Parts Used:
-
Charles from Newark, DE
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
366 of 372 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sparks and loud hum from oven
1. I went to the internet to find the service manual for the Maytag microwave.
2. I opened up the oven and started measuring the resistance of the diode, capacitor, transformer, and magnetron between terminals and then to ground. The transformer and magnetron were well within the resistance limits. The diode was shorted in both directions(+-). The capacitor was fully open in both directions -- high resistance.
3. I ordered the 2 parts, installed them, and ran the oven. Worked perfect first time.
4. Reinstalled oven and worked ever since (1 week so far).
5. The secret was that the transformer had a load hum. I figured the transformer was OK. The magnetron had no short between filaments and ground to filaments. The only two left were the diode and capacitor. The first two are about $200 -- almost the value of a new microwave. The $70 repair was well worth it. If the first two were still bad, then tempted to buy a new oven.
2. I opened up the oven and started measuring the resistance of the diode, capacitor, transformer, and magnetron between terminals and then to ground. The transformer and magnetron were well within the resistance limits. The diode was shorted in both directions(+-). The capacitor was fully open in both directions -- high resistance.
3. I ordered the 2 parts, installed them, and ran the oven. Worked perfect first time.
4. Reinstalled oven and worked ever since (1 week so far).
5. The secret was that the transformer had a load hum. I figured the transformer was OK. The magnetron had no short between filaments and ground to filaments. The only two left were the diode and capacitor. The first two are about $200 -- almost the value of a new microwave. The $70 repair was well worth it. If the first two were still bad, then tempted to buy a new oven.
Parts Used:
-
Guy from Bellingham, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
113 of 170 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!