Models > JES2150MR1SA > Instructions

JES2150MR1SA General Electric Microwave - Instructions

All Instructions for the JES2150MR1SA
1 - 11 of 11
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
brokencooking dish
easy to handle
Parts Used:
Cooking Tray Roller Guide
  • Edward from Indianapolis, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The little wheels keap coming off.
R & R - Remove old part,cleaned roller grove,Replaced old part with new one.Job done.
Parts Used:
Roller Guide
  • David W. from Dover, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic wheel (Roller) on the turntable plate support roller guide.
Open the shipping package the new roller guide comes in and removed it from the package. Open the microwave door and removed the glass turntable plate. Remove the broken roller guide ring and roller wheel/s. Clean the surface that the roller guide assembly rides on. Place the new roller guide assembly into the microwave. Clean the bottom surface of the glass turntable plate that the roller guide wheels ride on and put the plate back into the oven. Place a cup of water onto the turntable plate close the oven door and start the microwave. Looking through the door assure that the new roller guide assembly is rolling smoothly under the turntable plate. Stop the oven, remove the cup, reset the oven timer.
Parts Used:
Roller Guide
  • Marshall from CRESTWOOD, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace the circle that makes tray turn
I felt proud of myself for just taking time to get serial # ,call verify on serial # to match picture on internet.,which #did not match part, so I question, a re check ;thank goodness I did as the part would have been to large, so glad I ask question before mailing.
Parts Used:
Roller Guide
  • Helen from CINCINNATI, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Closure assembly bent and slide wheel broke
The key to this repair is attaching the spring once the rest of the assembly is attached. I primarily used a wratcheting screw drive to remove the assembly but used a socket attachment with the screw bit to finish it off.

First, I removed the spring entirely. In order to attach the spring, I expanded the spring by sliding quarters into each of the coils (I had a quarter in every coil in order to get the ends as close as possible). I then first attached the spring to the post on the right side. I would have preferred to attach it to the closure assembly arm as the angle to attach was much simpler with the spring detached however there wasnt enough room to work around the post.

I then adjusted the closure assembly arm to be aligned with the spring and with a little elbow grease, stretched the string the remaining 1/2" or so and connected it to the arm. Once connected, I opened the fridge door and was easily able to remove the quarters.
Parts Used:
Cooking Tray
  • Josh from ENGLEWOOD, CO
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our original roller guide had a broken section which controlled the circular movement
We removed the glass circular plate of the microwave. We replaced the original roller guide with the new part. Then we placed the glass plate back in its place. Quick and simple.
Parts Used:
Roller Guide
  • Stephanie from OMAHA, NE
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1 of 3 roller wheels came off
Removed old roller assembly and installed new roller assembly.
Parts Used:
Roller Guide
  • Earnest from WINCHESTER, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I needed a new glass hot plate for a cracked plate that came with the original microwave.
I placed the new hot plate in the old microwave. It worked perfectly, and no tools needed
Parts Used:
Cooking Tray
  • Jeffrey from RALEIGH, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass cooking tray broken
Simply replaaced broken cooking tray
Parts Used:
Cooking Tray
  • John from Laurel, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken glass tray
just placed it on the wheel
Parts Used:
Cooking Tray
  • Jeff from Warner Robins, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No problems
Remove the Glass rotating tray and replace the guide
Parts Used:
Roller Guide
  • Donald from New Orleans, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JES2150MR1SA
1 - 11 of 11
Back to Top