Models > JES2150MR1SA

JES2150MR1SA General Electric Microwave - Overview

Sections of the JES2150MR1SA

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Roller Guide – Part Number: WB02X10895
Roller Guide
★★★★★
★★★★★
(1)
PartSelect #: PS951887
Manufacturer #: WB02X10895
The roller glide in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If ...   No Longer Available
Cooking Tray – Part Number: WB49X10108
Cooking Tray
PartSelect #: PS956195
Manufacturer #: WB49X10108
This tray rotates in your microwave ensuring more even temperatures
$137.92
  Special Order
USE AND CARE MANUAL – Part Number: 49-40635
USE AND CARE MANUAL
PartSelect #: PS3510003
Manufacturer #: 49-40635
USE AND CARE MANUAL   No Longer Available

Questions And Answers for JES2150MR1SA

Be the first to ask our experts a question about this model!

Common Symptoms of the JES2150MR1SA

[Viewing 1 of 1]
Tray won’t turn
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
brokencooking dish
easy to handle
Parts Used:
Cooking Tray Roller Guide
  • Edward from Indianapolis, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our original roller guide had a broken section which controlled the circular movement
We removed the glass circular plate of the microwave. We replaced the original roller guide with the new part. Then we placed the glass plate back in its place. Quick and simple.
Parts Used:
Roller Guide
  • Stephanie from OMAHA, NE
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Closure assembly bent and slide wheel broke
The key to this repair is attaching the spring once the rest of the assembly is attached. I primarily used a wratcheting screw drive to remove the assembly but used a socket attachment with the screw bit to finish it off.

First, I removed the spring entirely. In order to attach the spring, I expanded the spring by sliding quarters into each of the coils (I had a quarter in every coil in order to get the ends as close as possible). I then first attached the spring to the post on the right side. I would have preferred to attach it to the closure assembly arm as the angle to attach was much simpler with the spring detached however there wasnt enough room to work around the post.

I then adjusted the closure assembly arm to be aligned with the spring and with a little elbow grease, stretched the string the remaining 1/2" or so and connected it to the arm. Once connected, I opened the fridge door and was easily able to remove the quarters.
Parts Used:
Cooking Tray
  • Josh from ENGLEWOOD, CO
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!