This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
This part is the replacement light bulb for your microwave. This bulb is 125 volts and 25 watts. It should come on automatically when you open your microwave door, or if the microwave is running. If y...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandra
October 14, 2022
i do not know what part is needed? can you explain??? it shows PF most of the time.... yet wall outlet is working well... can lite dimming affect operation?
Makes a noise when lite dims.....
For model number JES1460DS3WW
Hello Sandra, thank you for your question. PF error code on your microwave indicates a power failure. Pressing the cancel button should clear up your problem, and put you back in business. If not, unplug the unit, plug it back in and try the cancel button again. If trouble persists, your Control Board, part number PS11762562, is probably at fault. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Was this helpful?
Thank you for voting!
Bill
March 18, 2023
What is the wattage on my microwave?
For model number JES1460DS3WW
Hello Bill, Thank you for your inquiry. We have researched the model number that you have provided and show it is 1100 watts. We hope this helps you.
Was this helpful?
Thank you for voting!
Judy
May 25, 2023
Microwave had burning odor right after turning on but food was not even hot yet and definitely not burning. Next time the control display went dark when I pressed start. When I unplugged and replugged it showed "PF" on display but entire display went off when I pressed start. Now display does not light at all. Is there a simple and inexpensive fix?
For model number JES1460DS3WW
Hello Judy, thank you for the question. If the microwave shows a PF error code, it means that either your magnetron is going bad and leaking microwaves or the control board itself is bad. You may need to check the electronic control board, part number PS11762562, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Mat
October 17, 2023
What is the dimension of this old microwave? H x D x W
Thank you.
For model number JES1460DS3WW
Hello Mat, thank you for getting in touch. We have found that the dimensions of your model are height: 12 1/2 inches, depth: 16 3/8 inches, and width: 21 7/8 inches. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover and test to see if that solved the problem. If so then well done!!