This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 1, 2023
Where is the fuse located ?
For model number GTD72GBSN0WS
Hello Robert, Thank you for writing. The Fuse is located in a Fuse Holder where the Power Cord is attaches to the appliance. It is under a Square Silver Cover. We hope this information helps!
No display dryer will not power on chcked poweer to outlet 120V power present
For model number GTD72GBSN0WS
Hello Jeff, thank you for reaching out. Based on our understanding of the issue, we would suggest you replace the control board, part number PS16619012. Before replacing the board, make sure the thermal fuse is not blown. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Edgar
October 28, 2023
my dryer doesn't power on
For model number GTD72GBSN0WS
Hi Edgar, thank you for getting in touch. According to our research, we would suggest replacing the dryer fuse, part number PS10065161, to fix the issue. It protects the dryer from damage by shutting off the voltage in the event of an electrical short. Glad to be of help!
Put my clothes in dryer and hit start button.nothing happens and it doesn’t sound like the motor is running should I replace the belt and the motor
For model number GTD72GBSN0WS
Hi Sherry, thank you for writing in. Our research has found, the most common reason for your appliance to not start is the Door Switch is faulty and should be replaced. Part number PS12722948 is the correct Door Switch for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Thomas
20 days ago
Clothes dryer stopped in mid cycle. will not power on now at all. There is power in the outlet.
For model number GTD72GBSN0WS
Hi Thomas, thank you for the question. We would suggest checking the dryer fuse, part number PS10065161. It protects the dryer from damage by shutting off the voltage in the event of an electrical short. You may need to replace it to fix the issue. We hope this sorts out your problem!
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
I had to take most of the dryer apart because there is no rear access to the motor. It turned out to be easy to dissasembel the dryer. The only problem that I had was that I could not figure out how to route the belt around the motor and the idol pullies. I could not find anywhere that gave instructions on how to properly tension the belt. I finally figured out that the idoler pulley needs to be locked in place on the right side of the engie mount. Then the belt needs to be routed over idoler pulley and under the motor pulley. Finally release the idoler pully from the locked postion to put tension on the belt. It really turned out to be pretty easy.
Pryed off the top with a flat head screwdriver and removed the 2 screws holding the front panel to the sides. Then lifted the front panel off of the bottom brackets. Belt fit perfectly and followed the provided instructions to loop it around the motor and pulley. PartSelect got the part to me within a couple of days and the repair was a snap.
