This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charlie
June 4, 2022
Dry will start and run as long as you hold the start button and when you release the start button it stops
For model number GTD42GASJ0WW
Hello Charlie, Thank you for your inquiry. We have researched the model number that you have provided and would recommend checking the push to start switch, the door catch, the door switch, and the door strike. You can test the door switch and push to start switch with a multimeter, and check the catch and the strike for any visible damage. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I just replaced a broken belt on my dryer. It starts, but won’t run after l take my finger off the button. I was told it’s an interlock switch, but can’t find it online. Is it the same as a start switch?
For model number GTD42GASJ0WW
Hello Pat, thank you for contacting us. The infinite switch and push-to-start switch are not the same. According to our research, most probable cause of the issue is a faulty start switch, part number PS3487190. You can test it with a multimeter to ensure its functionality. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
the start switch grounded and fried and now no power to the switch. power to the unit is confirmed however
For model number GTD42GASJ0WW
Hi Mike, thank you for contacting us. We would suggest checking and verifying the wiring connections to the start switch, part number PS3487190. To verify if the switch is burned or shorted, check its continuity using a multimeter. You may need to replace the switch if it is shorted. We hope this information helps!
I replaced the start switch and the fuse and it still doesn’t stay on I also keep my finger on the door switch to see if the motor turns and it doesn’t
For model number GTD42GASJ0WW
Hello Chris, thank you for reaching out. If the dryer would not start after pressing the start switch, then you may need to replace the door switch, part number PS12722948, to fix the issue. It prevents the dryer from running when the door is open. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
First I found and watched three videos on how to open the dryer and replace the igniter. Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown. I got on-line and ordered the new parts from PartsSelect in the afternoon and had them in my hands the next morning by 9:30 am. I installed the new parts and everything worked fine again. You must be very careful with the igniter to not touch it with hands or anything else. I practiced puting in the old parts first.
I had to take most of the dryer apart because there is no rear access to the motor. It turned out to be easy to dissasembel the dryer. The only problem that I had was that I could not figure out how to route the belt around the motor and the idol pullies. I could not find anywhere that gave instructions on how to properly tension the belt. I finally figured out that the idoler pulley needs to be locked in place on the right side of the engie mount. Then the belt needs to be routed over idoler pulley and under the motor pulley. Finally release the idoler pully from the locked postion to put tension on the belt. It really turned out to be pretty easy.