If your dishwasher door will not close, is noisy when operating, or the dishes are not cleaning properly, you might need to replace one or more of the wheels. Each wheel and axle are made of plastic a...
This baffle fits the lower right hand corner of some dishwashers. It is black and has a matching left hand lower corner baffle. It is recommended that you replace and install both left and right at the same time.
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is causing the door to...
This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and is made of stainless steel.
This part helps keep the rinse aid the dispenser until its needed.
$79.67
Special Order
Questions And Answers for GSC3508K00WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephanie
June 1, 2023
Can someone please recommend a faucet tap adapter/aerator that will actually fit my model GE Portable Dishwasher? I’ve purchase 2 different ones at Home Hardware and NEITHER fit. My sink faucet is just a normal old faucet, nothing fancy. Any help would be greatly appreciated! Thank you,
For model number GSC3508K00WW
Hi Stephanie, thank you for getting in touch. The part you are looking for is the faucet adapter, part number PS259736. We hope this helps!
Serial number zl600050a. I want to know the year of the dishwasher and if replacing parts are still available. Thank you for your time
For model number GSC3508K00WW
Hello Jacelyn, Thank you for the question. According to the serial number this product may have been manufactured December of 1982 or 1994 or 2006 or 2018. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Evelyn
February 24, 2024
How do you remove the filter cover to clean it? How do you remove the sprayer to clean it as well?
For model number GSC3508K00WW
Hi Evelyn,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference for information on how to remove and install the filter. The washer in the video may not be the same as yours, but it will give you a general idea on how to access the part. We hope this helps!
There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece then slide the rollers out. Place two new rollers in the rail and put the plastic end piece on. Use the hammer and punch to bend the metal clip back into place. Snap the rails on the rack and set the rack on the guides in the dishwasher. Replace the top guide using the screwdriver, you will have to twist the rails in order get them in between the guides.
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
Open the tiny plastic package in inserted the wheel onto the "axle". Opened the dishwasher, pulled out the bottom rack and snapped the wheel onto the rack. Done!