Range Oven Door Handle. This door handle is white in colour. 29" in length
This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & E...
$138.88
In Stock
Order within the next 8 hrs and your part ships today!
This kit is used to convert your appliance to liquid propane. This liquid petroleum gas conversion kit contains seven orifices, each under an inch long.
$83.58
In Stock
Order within the next 8 hrs and your part ships today!
This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the t...
$205.88
In Stock
Order within the next 8 hrs and your part ships today!
Order within the next 8 hrs and your part ships today!
Questions And Answers for FFGF3013LWD
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sean
December 20, 2019
I turn the bake setting on set the temperature but nothing happens and before it quit working it would still come on occasionally when it felt like it would it be the igniter or the safety valve that causes that problem?
For model number FFGF3013LWD
Hello Sean, thank you for your question. Yes, we would recommend testing the igniter and safety valve first. If the igniter doesn't draw enough power the gas valve will not open to allow the gas to be lit. I hope this helps.
Was this helpful?
Thank you for voting!
PD
January 8, 2020
When i push bake it says f13
For model number FFGF3013LWD
Hello PD,
Thank you for your question. The F13 error code normally indicates that you have a bad Electronic Oven Control board. There is a possibility that you can get this error code due to a power surge through the electrical power lines. Try disconnecting the electrical power to the range by turning off the electrical breaker. Leave the power disconnected for at least 30 seconds. Reapply the power by turning the breaker back on. If the error code reappears, you will need to replace the Electronic Oven Control board under part PS12717913 for your model. We hope this helps!
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new. Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from safety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook.
The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken off the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done.