EXFAC200 DeVilbiss Compressor - Overview
Models starting with EXFAC200
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
TUBE SEAL
PartSelect #: PS12522478
Manufacturer #: N044359
This replacement tube seal is designed to prevent air leaks and maintain efficient compressor performance. Sold individually, it fits securely onto the outlet tube that connects to the head of the com...
$5.95
In Stock
SCREW #10-9X.500 THD
PartSelect #: PS12523890
Manufacturer #: SSF-3156
This is a genuine manufacturer-sourced replacement screw which is specially produced for use with portable generators and air compressors. Make sure to refer to the appropriate diagrams of your model ...
$5.95
Special Order
Connecting Rod Assembly
PartSelect #: PS10049057
Manufacturer #: N036518
This genuine OEM replacement kit is designed for use with select air compressors and includes essential components to restore proper function. The kit comes with a piston rod, compression ring, cylind...
$76.34
In Stock
Oring 2.132/2.096id
PartSelect #: PS10050740
Manufacturer #: SSG-8169
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many cause...
No Longer Available
Brush Set (2 Brushes)
PartSelect #: PS10054593
Manufacturer #: Z-D23825
Genuine Porter Cable replacement part Includes 2 Carbon Brushes with wire lead attached and installation instructions. • Worn brushes are frequently the cause of a poorly running motor. • Repla...
No Longer Available
Common Symptoms of models starting with EXFAC200
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn piston rod and sleeve
Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.
Parts Used:
-
Donald from BRYAN, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The compressor was getting air
Put the seal in and it ran like a champ. No vacuum leak and it now runs again!
Parts Used:
-
Linda from CARO, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!