This door latch, also referred to as a door strike, is designed to secure the washer door during operation, helping to prevent leaks and ensure the appliance starts properly. Made from brushed metal, ...
This is a door boot, also known as a door gasket or door bellows, for various models of washing machines. This door boot is used to seal the inner drum of the washing machine from the inside of the w...
This door lock assembly is engineered to secure the washer door during active wash and spin cycles, ensuring safe and uninterrupted operation. Designed for compatibility with select models from Frigid...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in plac...
This valve helps your washer get the right amount of water into the detergent, bleach, and softener compartments. If your washer isn’t filling properly, leaking, or not cleaning well, the valve might ...
Have you been facing leaking issues with your washing machine? Our genuine and high-quality Frigidaire Bellows Spring Clamp could be the simple solution you need. Designed for your washing machine's d...
This washer pressure sensor switch monitors water levels inside the tub to help regulate filling, washing, and draining during each cycle. It supports proper washer operation by signaling when the cor...
Having a problem with your washing machine? Weve got a solution for you. Introducing the genuine Frigidaire Shock Absorber. This is more than just a partits a key ally for your Frigidaire washing mach...
Do you have a Frigidaire, Electrolux, White Westinghouse, or Tappan appliance that's not working as it should? Consider the Frigidaire Recirculation Hose, a genuine OEM part that could be the fix you'...
$58.30
In Stock
Questions And Answers for EFLS517STT0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
November 28, 2019
When unit starts to drain water it partially drains then unit turns off.
For model number EFLS517STT0
Hello Tom, Thank you for the question. This could be an issue with a defective Drain Pump PartSelect Number PS12365827. I would suggest cleaning out the pump and hose before replacing the pump. Hope this helps!
after replacing main control board, washer worked well for about a month, now cycles normally but now when tumbling or spinning, starts to turn but then stops
For model number EFLS517STT0
Hi Nick,
Thank you for your question. If the washer is not tumbling or spinning, the belt may be worn or broken and it will need to be replaced. The part number for the belt is PS2349239. We hope this helps!
washer was not cycling properly, replaced control board, worked for a month, belt is fine, fills & cycles fine but when time to tumble or spin, motor starts then stops
For model number EFLS517STT0
Hi Nick, Thank you for writing. This can indicate a faulty Board, Wiring or a Motor. They would need to be checked for continuity or wear. We hope this helps!
Our washer is just over a year old. It is leaking water during the wash cycle, not a lot, likely 1/4" cup. The leaking water seams to be coming from under the machine, more on the left side (at least that is the side the water is coming from under the machine). Any help is greatly appreciated. I was thinking of buying cameras and setting them up under the machine to see where it was leaking but maybe you could help before i put a camera in a wet location. Thanks.
For model number EFLS517STT0
Hello Brian, thank you for your question. The most likely cause of that leak is the door gasket that seals the water in the tub. The bellow can become cracked, or torn. Alot of times items left in pockets can get down in the crease of the bellow and cause pin holes as well. We would recommend inspecting the bellow to determine if the water is coming from there. I hope this helps.
Hello Richard, thank you for contacting us. The washer circulation pump is part number PS12365825, and the washer drain pump is part number PS12365827. If you require assistance to place an order, please contact customer service. We hope that helps!
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Unscrewed the two screws holding the latch and screwed on the new one. Took less than 5 minutes. The best part was that I ordered the latch on Friday and it was delivered on Saturday!
