Makita Electric Drill Parts

Your Price

$36.49

PartSelect Number PS10153834

Manufacturer Part Number 664064-4

Length 8 Foot Length: 6' Gauge: 18 Wires: 2 Type: Bare Wire This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Makita power tools. A cracked or damaged cord should be replaced before continuing to use the tool. This rubber insulated cord is sold individually. It comes with a rubber sleeve grommet that is not sold separately. Replacing this power supply cord you will need a screwdriver. • Remove the housing screws • Remove the the housing • Disconnect the old cord wires • Remove the old power cord • Secure the new cord in place • Connect the wires • Reassemble and test the new cord

Your Price

$10.83

Makita Electric Drill Cord Guard

PartSelect Number PS10153918

Manufacturer Part Number 682502-4

This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool will help will cord life. This cord guard is compatible with the tools listed below, but it is not guaranteed to fit any other power tools.

Your Price

$26.02

Makita Electric Drill Ball Bearing

PartSelect Number PS10141520

Manufacturer Part Number 211031-6

Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Your Price

$24.14

Makita Electric Drill Helical Gear 41n

PartSelect Number PS10142974

Manufacturer Part Number 227769-3

This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with drywall screwdrivers. The metal gear is used to drive the spindle by interconnecting with the armature's gear. This item is sold as an individual replacement part.

Your Price

$47.70

Makita Electric Drill Power Cord (8-foot)

PartSelect Number PS10153856

Manufacturer Part Number 664630-7

This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 8 Feet Long

Your Price

$47.66

Makita Electric Drill Variable Switch

PartSelect Number PS10153474

Manufacturer Part Number 650208-2

This Trigger type VAR switch has 4 internal terminals and a locking mechanism. This genuine Makita replacement part is sold individually. Switches are commonly replaced parts in power tools. A switch handles on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are: • The tool has completely stopped functioning • it will not turn on. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't turn on at all. • The variable speed function and electric braking aren't working properly.

Your Price

$24.37

Makita Electric Drill Ball Bearing 607llb

PartSelect Number PS10141514

Manufacturer Part Number 211021-9

This replacement ball bearing is an authentic Makita item. It is supplied directly from original equipment manufacturer for use with angle grinders. Please check diagrams for proper application of this item. The bearing is specially designed to reduce friction between rotating parts. Over time it will wear out and will need to be replaced. This is a sealed metal bearing and it is sold individually. Included in part number 515616-3

Your Price

$57.63

Makita Electric Drill Switch

PartSelect Number PS10153531

Manufacturer Part Number 650614-1

This genuine Makita part is made by original manufacturer. This item fits drywall screwdrivers and other handheld power tools. Switch trigger is made of plastic material. Reversing switch lever is included in this part. This easy repair requires only a screwdriver to remove tool casing for switch installation.

Your Price

$47.44

Makita Electric Drill Spindle 125n

PartSelect Number PS10147934

Manufacturer Part Number 324983-3

Your Price

$11.41

Makita Electric Drill Grip 36

PartSelect Number PS10139492

Manufacturer Part Number 152492-0

This replacement side handle grip is specially designed for use with Makita power tools. It is an authentic high quality item that is sourced directly from original equipment manufacturer. This is the side handle that provides a safe and stable grip for your tool. Please note, this plastic grip is sold individually. No tools would be needed to replace this item. Simply screw it in the threaded opening on the housing.

Top Appliance Brands

Top Appliances

Popular Makita Electric Drill Parts

Makita Electric Drill Appliance Types

Popular Makita Electric Drill Models

Top Appliance Brands

Top Appliances

EasyApplianceParts is Now PartSelect!

Makita Electric Drill Parts

Find Your Part

Popular Makita Electric Drill Parts

Makita Electric Drill Appliance Types

Popular Makita Electric Drill Models