Makita Cordless Drill Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Makita Cordless Drill Parts
Your Price
$68.68
Special Order
Makita Cordless Drill Housing Set
PartSelect Number PS16302376
Manufacturer Part Number 183E34-9
This housing set is a replacement enclosure designed to protect internal components and maintain structural integrity. It is commonly replaced when cracked, worn, or damaged from impact or heat.
Your Price
$7.44
In Stock
Makita Cordless Drill Flat Washer
PartSelect Number PS10144369
Manufacturer Part Number 253804-1
Genuine Makita replacement part, it is sold individually. This washer is used in various areas in the tool model numbers shown below. It is used as a washer for a screw or bolt or even as a spacer.
Your Price
$26.02
Special Order
Makita Cordless Drill Ball Bearing
PartSelect Number PS10141520
Manufacturer Part Number 211031-6
Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Your Price
$58.21
In Stock
Makita Cordless Drill Keyless Drill Chuck 13bdf452hw
PartSelect Number PS11885251
Manufacturer Part Number 766027-7
This is an OEM sourced replacement part designed for use with Makita drills/drivers. It allows user to secure drill bits. The ratcheting action clicks the jaws tightly into place for reduced bit slippage. If your drill\'s bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. Please note the screw used to secure this chuck it is sold separately.
Your Price
$71.11
In Stock
Your Price
$12.26
Special Order
Makita Cordless Drill Terminal
PartSelect Number PS10153397
Manufacturer Part Number 643852-2
Genuine Makita replacement part, this item is sold individually. This part is what the battery terminals connect to. With the use of its terminals, it sends the power from the battery to electrical parts of the the tool to make it function. It is installed between the two housings to hold it in place.
Your Price
$7.44
In Stock
Your Price
$17.87
In Stock
Makita Cordless Drill Brush Holder
PartSelect Number PS10153308
Manufacturer Part Number 638614-1
This is an Authentic Manufacturer Sourced replacement part used on a Makita Drills/Drivers. This part consists of: Plastic Holder Ring, Two (2) Metal Brush Holders With Springs and Two (2) Lead Wires Attached. This part holds Carbon Brushes around the Armature to provide stable and safe contact. Please note Carbon Brushes are Sold Separately. To replace this assembly you would need a Screwdriver and Pliers. • First remove Screws holding the cover together. • Carefully remove Two (2) Halves of the housing to gain access to Armature and Brush Holder. • Remove the screws holding Brush Holder to The Trigger. • Remove the Armature Assembly and the Brush Holder. • Install the New Brush Holder, Brushes and the Armature • Reassemble and test your tool.
Your Price
$7.44
Special Order
Makita Cordless Drill Change Lever
PartSelect Number PS10150817
Manufacturer Part Number 419250-0
This is a genuine Makita replacement part, it is sold individually. The purpose of the F/R Change Lever is to change the rotation of the drill motor. It connects to the switch of the tools listed below. By pressing it left or right this will change the rotation of the drill.
Your Price
$7.44
Special Order
Makita Cordless Drill Appliance Types
Popular Makita Cordless Drill Models
Below are the most popular Makita Cordless Drill models we have. Enter your model number in the search box to find your model.
- XPH06 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit
- BDF452 18V LXT Lithium-Ion Cordless 1/2" Driver-Drill
- LXPH03 18V Hamer Driver-Drill
- XPH03M 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit
- BHP451 Drill / Driver
- XVR02T 18v Lxt® Lithium-Ion Brushless Cordless Rivet Tool Kit (5.0ah)
- XFD01 18V LXT Lithium-Ion Cordless 1/2" Driver-Drill Kit
- BDA350 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
- LXFD01CW 18V Compact Lithium-Ion Cordless 1/2" Driver-Drill
- DA391D Cordless Drill
- DS4011 1/2" Spade Handle Drill
- BDF452HW Drill / Driver
- XPH01RW 18V Compact Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit
- 6070D Cordless Drill
- BDF451 Drill / Driver
- 6010SD Cordless Drill
- XDT13M Impact Driver
- XFD15RB 18v Lxt® Lithium-Ion Sub-Compact Brushless Cordless 1/2 Inch Driver-Drill Kit (2.0ah)
- FD02W 12V max Lithium-Ion Cordless 3/8" Driver-Drill Kit
- XFD01RW 18V Compact Lithium-Ion Cordless 1/2" Driver-Drill Kit