Kenmore Dishwasher Parts

Your Price

$42.60

Kenmore Dishwasher Lower Dishrack Wheel

★★★★★

329 Reviews

PartSelect Number PS3406971

Manufacturer Part Number W10195416

This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Videos!

Your Price

$66.53

Kenmore Dishwasher Upper Rack Adjuster Kit - White Wheels, Left And Right Sides

★★★★★

404 Reviews

PartSelect Number PS10065979

Manufacturer Part Number W10712395

This authentic Dishwasher Upper Rack Adjuster Kit with white wheels is a kit made up of primarily plastic and metal components, which will require a screwdriver to install. This kit comes with all the necessary parts for a dishwasher rack adjuster. It fits onto the dishwasher rack and connects it to the track allowing it to slide in and out. If broken then the rack will no longer slide properly, and the part must be replaced. In many cases, our customers have reported the top rack of their dishwasher hanging down or sagging due to the adjuster kit, particularly if the wheels, have broken or failed. If you are having problems in this area, this kit will help get your dishwasher back up and running. Check your model number and user manual to see if this part is right for you. The parts for this kit come as a package and are not generally sold individually.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Your Price

$41.29

Kenmore Dishwasher Upper Rack Adjuster

★★★★★

260 Reviews

PartSelect Number PS11756150

Manufacturer Part Number WPW10546503

This OEM Dishwasher Upper Rack Adjuster is a grayish-black, plastic part which will require a screwdriver to install. It fits onto the dishwasher rack and connects it to the track allowing it to slide in and out. If broken then the rack will no longer slide properly, and the part must be replaced. The installation has been rated as "easy" by customers. Before beginning any repair, you should unplug the dishwasher and wear gloves to protect your hands. Check your model number and user manual to see if this part is right for you! Your dishwasher should have a left and right upper rack adjuster, and both are the same part. These parts are sold individually, so if you are looking to replace both, you will need to order two parts.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Videos!

Your Price

$13.24

Kenmore Dishwasher Rack Track Stop

★★★★★

92 Reviews

PartSelect Number PS11746591

Manufacturer Part Number WP8565925

The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Your Price

$58.55

Kenmore Dishwasher Lower Dishrack Wheel Assembly

★★★★★

90 Reviews

PartSelect Number PS11750057

Manufacturer Part Number WPW10195417

This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.

Fixes these symptoms

Door latch failure
Door won’t close
Not cleaning dishes properly
See more...

Videos!

Your Price

$51.96

Kenmore Dishwasher Lower Spray Arm

★★★★★

162 Reviews

PartSelect Number PS12585623

Manufacturer Part Number 5304517203

The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.

Fixes these symptoms

Door latch failure
Leaking
Noisy
See more...

Videos!

Your Price

$56.68

Kenmore Dishwasher Heating Element

★★★★★

68 Reviews

PartSelect Number PS8260087

Manufacturer Part Number W10518394

This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dishes are not drying or the water in the dishwasher is not getting hot you may need to replace the element. This kit includes the heater, two heater fasteners, and is a genuine OEM part. Please remember to disconnect the power before starting the repair. Use a multi-meter to test your heating element for continuity to determine whether this is the part that is causing your symptom. This part does not include any washers. To make your repair, disconnect the wires from the bottom of the element in the back, remove the plastic nuts holding it in place, remove the element, and repeat these steps in reverse order to install your new part. This is an easy repair that requires only a screwdriver, wrench set, and should take less than 30 minutes.

Fixes these symptoms

Leaking
Not cleaning dishes properly
Not draining
See more...

Videos!

Your Price

$48.14

Kenmore Dishwasher Bottom Door Gasket

★★★★★

228 Reviews

PartSelect Number PS9495545

Manufacturer Part Number 809006501

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Your Price

$18.25

Kenmore Dishwasher Dishrack Roller - Grey

★★★★★

33 Reviews

PartSelect Number PS8727387

Manufacturer Part Number 00611475

This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lower dishrack of your dishwasher. On one side of the roller is a clip that allows it to be attached to the dishrack. The dishrack roller allows you to slide the dishrack in and out of the dishwasher efficiently. If one of the rollers is broken or missing, it can cause the dishrack to become difficult to slide in and out. To replace the roller, simply snap it off the dishrack, and snap the new one into place. This is a genuine OEM part.

Videos!

Your Price

$34.76

Kenmore Dishwasher Tub Gasket - Gray

★★★★★

48 Reviews

PartSelect Number PS8260227

Manufacturer Part Number 154827601

This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing water leaking out. If broken, it should be replaced. Refer to your model number and user manual to ensure this part is right for you. When making this repair, open the dishwasher door and take out the lower dish tray for better access. Pull out the old gasket, and clean the channel with a rag. Push the new gasket into place into the notch on the door, which you should see upon close inspection, using a flat-head screwdriver for assistance if necessary. We do not recommend cutting any additional length off on the tub gasket if any is present during your repair.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Top Brands

Top Product Types

Popular Kenmore Dishwasher Parts

Kenmore Dishwasher Appliance Types

Related Kenmore Dishwasher Parts

Popular Kenmore Dishwasher Models

Kenmore Dishwasher Parts

Find Your Part

Popular Kenmore Dishwasher Parts

Kenmore Dishwasher Appliance Types

Related Kenmore Dishwasher Parts

Popular Kenmore Dishwasher Models