Black and Decker Trimmer Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Black and Decker Appliance Parts
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Appliance Type Shop By Part Type

Popular Black and Decker Trimmer Parts

Your Price
$20.56
  In Stock
Black and Decker Trimmer Bump Cap
PartSelect Number PS10184171
Manufacturer Part Number 682378-02
This genuine Black & Decker replacement spool cap is designed to hold the spool and bumper securely inside the spool housing of your trimmer. It features two snap-in tabs that make installation and removal quick and easy—just press the tabs to release it from the housing when it’s time to replace or clean. Made from durable plastic, this part is sold individually and measures 2-5/8 inches wide. If your current cap is cracked, missing, or no longer holding the spool properly, this is the part you need to get your trimmer back in action. Be sure to check your model’s diagram or manual to confirm the correct fit.
Your Price
$22.72
  In Stock
Black and Decker Trimmer Guard Assembly
PartSelect Number PS11926568
Manufacturer Part Number 478535-00
Genuine Black and Decker replacement part, this item is sold individually. This guard is used on the trimmer models shown below. The purpose of this part is to keep debris from being thrown by the cutting line and being stopped by the Guard The Guard includes the line cutting blade, to keep the line at the correct length.
Your Price
$5.95
  In Stock
Black and Decker Trimmer Carbon Brush With Wire Lead An
PartSelect Number PS10170841
Manufacturer Part Number 387558-01
Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.
Your Price
$5.95
  In Stock
Black and Decker Trimmer On-off Switch
PartSelect Number PS10170531
Manufacturer Part Number 383994-00
This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.
Your Price
$5.95
  In Stock
Black and Decker Trimmer Spring
PartSelect Number PS10167401
Manufacturer Part Number 243603-00
This spring, often referred to as a recoil spring or spool spring, is sourced from the original manufacturer for use in trimmers. It is located within the spool housing where it is responsible for holding the spool in place. The coils wrap around the trimmer line spool and allow the spool to rotate and release new string. It is normal for the spring to wear down, become corroded, or fall off if it is not properly secured. A faulty compression spring will lower the cutting ability of the trimmer and make it difficult or impossible to feed a new line. To access the faulty spring, you may need to disassembly the spool housing. Remove the spring cap and set it aside. If the cap is damaged or loose, it is recommended to replace it at the same time to prevent the spring from dislodging. Carefully unwind the coil from the spool and pull it out of the spool housing assembly. Position the new spring on the spool and tension it by tightly winding the coils to the desired tension level. Reattach the cap and reassemble the spool housing assembly.
Your Price
$7.98
  In Stock
Black and Decker Trimmer Brush Ring
PartSelect Number PS10170348
Manufacturer Part Number 382178-01
This brush ring is an OEM from DeWALT. Compatible with mostly saw devices, the plastic brush ring has been designed to secure carbon brushes. This component is fitted onto the magnet ring. A screwdriver and an Allen wrench are needed in the removal and repair. This part is sold individually.

Black and Decker Trimmer Appliance Types

Related Black and Decker Trimmer Parts

Popular Black and Decker Trimmer Models

Below are the most popular Black and Decker Trimmer models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More