Here you will find a list of all of the parts for the KitchenAid Dishwasher KUDK03ITWH2. To narrow down the selection, simply enter the part name or description into the search bar.
This kit includes 2 door balance links and 2 door balance mounts with wheels.
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This is a basket for washing flatware or silverware in your dishwasher.
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Also known as Thermal Fuse.
This chopper assembly chops up/mince the food particles to prevent from clogging the dishwasher pump.
Used for upper dishrack track.
The pump ejects the water from the unit.
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
This part has a closed cast motor housing. The sump housing is sold separately.
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
The impeller threads to the motor shaft.
May differ in appearance, but functions same as original.
This valve allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2014 , Eldis Group Partnership. All rights reserved.